BSRT Tools


BSRT makes what are arguably the best tools in the industry. There tools are designed by racers using the finest materials and precision machining to bring their years of racing experience to the HO market.

At first glance these tools may seem to be more expensive than other similar tools on the market, but BSRT tools are designed to last a lifetime. You'll be glad you have them in your tool box.

BSRT's attention to detail and high-quality CNC-machining makes these the best tools you can own.


BSRT Oil & Lubricant

BSRT Micro Pin-Point Oiler BSRT lubricants are all synthetic. Unlike petroleum-based oils which will damage plastic over time, synthetic lubricants are both plastic-safe and offer the latest in lubricant technology.

The pin-point oiler applicators allow you to put a very small drop of lubricate exactly where it's needed without making a mess.

A properly lubricated slot car is essential to performance. Motor bearings and axles need to spin free to get top speed!


  BSRT Micro Pin-Point Oiler $6.99
  BSRT G-Juice Pin-Point Oiler $9.99
  BSRT G-Lube Gear Lube $9.99
View Simichrome Polish in Pop-Up Window Simichrome Polish $17.59

Simichrome Polish is used to break-in or lap gears. Put a small dab on the pinion and motor gears and run them in at a low voltage of 2-3 VDC for 15-30 minutes to polish the gear surfaces.

Simichrome Polish is also ideal for lapping gears on older vintage Aurora T-Jets and A/FX chassis. Put a dab on the gear plate between each of the gears and run them for 15-30 minutes at low voltage to polish the gears as well as the nylon gearplate itself. This same technique can also be used on Johnny Lightning/Auto World reproduction chassis.



BSRT Wheel & Tire Tools

BSRT Pro Wheel Puller BSRT wheel pullers and presses are a must if you work with Delrin wheel hubs on a regular basis. While you can press and pull wheels by hand these tools make the job a breeze, and you'll never damage a wheel using them.

A wheel puller and press are available for the large rear axle on any Tomy, BSRT G3 or Tyco slot car. These tools can also be used on vintage Aurora chassis.

A separate front wheel puller is also available. This tool is designed for front axles only! Do not use it on larger rear axles. Use this tool to remove the small Delrin retainers used with BSRT Independent Front End Kits as well.

Having two rear tires that are exactly the same diameter is essential. If the rear tire diameters differ the car will crab on the straights and handle poorly in the turns. Experienced racers measure their rear tires and store them in matched pairs. BSRT offers rear tire storage tubes specifically for this purpose.


View BSRT Pro Wheel Puller in Pop-Up Window BSRT Pro Wheel Puller $47.99
View BSRT Pro Wheel Press in Pop-Up Window BSRT Pro Wheel Press $30.00 Temporarily Out of Stock
View BSRT Pro Front Wheel Puller in Pop-Up Window BSRT Pro Front Wheel Puller $28.75
View BSRT Front Tire Truing Mandrel in Pop-Up Window BSRT Front Tire Truing Mandrel $8.49
View BSRT G3 Wheel Drilling Jig w/ Bit in Pop-Up Window BSRT G3 Wheel Drilling Jig w/ Bit $24.99
View BSRT Tire Gauge (.002 Increments) in Pop-Up Window BSRT Tire Gauge (.002 Increments) $36.00
  BSRT Rear Tire Storage Tubes (4) $4.55 Temporarily Out of Stock

BSRT Electrical & Motor Tools

Clean pickup shoes are a must, nothing will rob power from a motor like a dirty pair of pickup shoes. BSRT has just the tool to keep your pickup shoes clean, and unlike an ink erasure or emory cloth, their pickup shoe cleaner doesn't leave behind shredded rubber or fine metal particles to foul your motor and chassis.

BSRT Super G+Plus Endbell Tool
BSRT's end bell tool is a CNC-machined alternative to Tomy's Armature tool. This tool is a must if you plan on doing motor work. It also can be used to press and pull motor bearings. This tool can be used on any Tomy Super G+Plus or BSRT G2/G3 endbell.


View BSRT Pickup Shoe Cleaner in Pop-Up Window BSRT Pickup Shoe Cleaner $9.99
View BSRT Super G+Plus Endbell Tool in Pop-Up Window BSRT Super G+Plus Endbell Tool $15.49 Temporarily Out of Stock
View BSRT Armature Spacer Tool in Pop-Up Window BSRT Armature Spacer Tool $28.50 Temporarily Out of Stock
  BSRT Chassis Setup Tech Block $36.00 Temporarily Out of Stock

It's important that the motor in a slot car spin freely, but it's also important to assure that it doesn't slide forwards and back between its bearings. An armature spacing tool allows you to adjust for motor backlash by positioning motor spacers fore and aft of the armature itself.

The machined opening represents the distance between the front and rear motor bearings. Place your motor in this fixture and add spacers until you eliminate lateral motor movement but the motor can still spin free.

A chassis tech block will assure that your slot car isn't too wide. Most club rules specify a maximum overall width. This tool guarantees that you have your tires extended as far apart as is legally allowed.


BSRT Body & Chassis Tools

BSRT Lexan Body Mounting Fixture
Anyone who has ever hand-mounted a Lexan™ body knows just how tedious it can be using fingernail scissors and push pins. Well BSRT comes to the rescue again with their Body Mounting Fixture. This item takes the guesswork out of trimming and fitting Lexan™ bodies and gives professional results the first time.


View BSRT Lexan Body Mounting Fixture in Pop-Up Window BSRT Lexan Body Mounting Fixture $59.99 Temporarily Out of Stock
View BSRT Lexan Threaded Body Post Tool in Pop-Up Window BSRT Lexan Threaded Body Post Tool $9.99

View BSRT Rear Axle Pins (4) in Pop-Up Window BSRT Rear Axle Pins (4) $1.50
  BSRT G3 Rear Axle Pinning Fixture $44.00 Temporarily Out of Stock

The faster you go, the harder you crash! The first item to come loose in a bad crash is often the rear axle assembly. BSRT makes a drilling fixture that will allow you to drill small holes in the rear of the chassis so that axle retaining pins can be fitted. The fixture includes the proper sized drill bit needed, of course.


BSRT Gear Pullers & Presses

Delrin and Polymer gears are tough, and while they're unlikely to strip their teeth they can also be difficult to press on and off. BSRT manufactures precision-machined pullers and presses to eliminate the tedium of gear replacement.


View BSRT Pro Crown Gear Puller in Pop-Up Window BSRT Pro Crown Gear Puller $47.99
View BSRT Pro Crown Gear Press in Pop-Up Window BSRT Pro Crown Gear Press $34.50
View BSRT Crown Gear Drilling Jig w/ Bit in Pop-Up Window BSRT Crown Gear Drilling Jig w/ Bit $29.99

View BSRT Pro Pinion Gear Puller in Pop-Up Window BSRT Pro Pinion Gear Puller $29.50 Temporarily Out of Stock

View BSRT Pro Pinion Gear Press in Pop-Up Window BSRT Pro Pinion Gear Press $33.75 Temporarily Out of Stock

General Purpose Tools

I also sell several general purpose tools useful for slot car repair and maintenance. These tools are not produced by BSRT, but maintain their same high standards of quality and design.


View 0"-4" Black Dial Face Caliper (SS) in Pop-Up Window 0"-4" Black Dial Face Caliper (SS) $19.99
View 6-Piece Jewelers Screwdriver Set in Pop-Up Window 6-Piece Jewelers Screwdriver Set $3.39
View Swivel Head Pin Vise w/ Chucks in Pop-Up Window Swivel Head Pin Vise w/ Chucks $7.99
View 12-Piece Needle File Set in Pop-Up Window 12-Piece Needle File Set $12.99
View File Handle - 1/4" Pin Vise in Pop-Up Window File Handle - 1/4" Pin Vise $7.99
View Miniature Pin Vise Drill in Pop-Up Window Miniature Pin Vise Drill $10.99

  

Copyright © 1999-2017 by HO Slot Car Racing. All Rights Reserved.

No part of this web site may be reproduced or transmitted in
any other form or by any means for commercial use without
the prior written permission of HO Slot Car Racing.

Page last updated on 19-Jun-2017
Home


Print