Viper Racing

Viper Racing Products offers a complete line of racing parts for Tomy Super G+Plus and Mega-G slot cars. These parts are high-performance racing products that will improve both the speed and handing of any Tomy AFX slot car chassis.

Along with a complete line of hop-up parts, Viper also offers fully race-ready slot cars and rolling chassis for those racers that prefer to simply purchase a complete chassis that's ready to win right out of the box!

Viper V1 Racing Chassis

Viper V1 Racing Chassis The Viper V1 chassis is a direct replacement for the standard Tomy AFX Super G+Plus (SG+) chassis. It incorporates a unique front bumper that protects the pickup shoes, a lightened timing bracket and enlarged traction magnets pockets for stronger traction magnets offering higher cornering downforce.

All of your standard Tomy SG+ parts can be transferred to this racing chassis to create a faster box stock racer. Dual front axle holes allow for both 1.5" GT and 1.625" Indy/F1 body shells.

You can remove the integral Lexan body mounts with a utility knife if you plan to run an injection molded body shell.

The Viper V1 chassis is injection molded using an engineering plastic that will not break or crack. The chassis comes complete with a lightened timing bracket, end-bell thrust bearing and traction magnet clip.

Note: I you want to use your standard box-stock Tomy SG+ traction magnets remember to also order a pair of magnet shim plates.


View Viper V1 Chassis w/Traction Magnets in Pop-Up Window Viper V1 Chassis w/Traction Magnets $15.99
View Viper V1 Chassis w/Body Tubes in Pop-Up Window Viper V1 Chassis w/Body Tubes $12.99

  Viper SG+ Magnet Shims (Pair) $1.49

Viper is manufacturing its own Tomy SG+ GT Body Clip, these are a direct replacement for the Tomy factory part. They also work with Viper's own chassis as well as the BSRT G3 chassis.

A second clip that lowers hard shell bodies by 0.020" is also available. Many Tomy body shells and Aurora A/FX shells will work with this lowered clip.

Lowering a hard shell body improves handling due to the new lowered center of gravity.

  Viper GT Body Clip $3.50
  Viper GT Body Clip (Lowered 0.020) $3.50


Viper SG+ Motor Armatures

Viper SG+ Motor Viper is also offering SG+ motor armatures. These are a direct replacement for the factory stock motor. They offer higher performance at a reasonable price.

The factory stock motor will work with a standard 22 VDC Tomy power pack, while the Outlaw motor requires the 1-Amp Tomy Tri-Power Pack or an Astron power supply.

The Box-Stock motor measures out at 6 ohms, while the Outlaw is a hotter 3-ohm wind.

These motor armatures can be used with any Tomy SG+ chassis or the Viper V1 racing chassis shown above.


View Viper Factory Stock Motor in Pop-Up Window Viper Factory Stock Motor $8.00
View Viper Outlaw Modified Motor in Pop-Up Window Viper Outlaw Modified Motor $10.00

  Viper SRT/Turbo Outlaw Motor $6.75

Viper SG+ Electrical Parts

Viper SG+ Motor Endbell Viper manufactures a new motor endbell that replaces the standard Tomy SG+ part. These endbells employ motor brushes 20% large than the stock item. They use arched brush contacts and an oversized bearing.

These endbells are available in two configurations; a box-stock replacement and an improved high-performance unit with a CNC-machined oversized motor bearing.

These endbells are direct replacements for the factory Tomy SG+ chassis and can be used in Viper V1 and BSRT G3 racing chassis as well.


View Viper Standard EndBell in Pop-Up Window Viper Standard EndBell $5.99
View Viper Performance EndBell in Pop-Up Window Viper Performance EndBell $10.00

Viper SG+ Pickup Shoes

Viper Pickup Shoes Viper pickup shoes are an improved copper shoe that replaces the standard Tomy SG+ pickup shoes. These pickup shoes have a larger contact patch over the standard Tomy factory part.

These pickup shoes will fit any Tomy SG+, Turbo or SRT chassis. They will also fit the Viper V1 and BSRT G3 racing chassis.

Viper also produces pickup shoe springs and an improved pickup shoe holder. These parts will fit any Tomy SG+, Turbo and SRT chassis as well as the Viper V1 and BSRT G3 racing chassis.


View Viper Standard Pickup Shoes (Pr) in Pop-Up Window Viper Standard Pickup Shoes (Pr) $2.00
  Viper Recessed Pickup Hanger (Pr) $2.50
  Viper .008 Pro Pickup Springs (Pr) $1.00

Viper Axles, Wheels & Gears

Viper Wheels & Tires Viper wheels and gears are precision CNC machined from black Delrin stock.

These parts will fit the Tomy SG+ Chassis, Turbo and SRT chassis, Viper and BSRT G3 racing chassis as well as all Tomy Mega-G and Mega-G Plus chassis.

Front and rear axles are hardened steel. Rear axles include a generous spline at the center for securing gears and stops. The ends are smooth for easy hub mounting.

The Front End kit includes a hardened steel axle, Delrin hubs and o-ring front tires. This kit will work with any Tomy slot car as well as Viper and BSRT G3 racing chassis.

The Rear End kit includes a splined axle, 23T Delrin Crown Gear and Boss, and a pair of .265" diameter rear hubs. This kit will also fit any Tomy, Viper or BSRT G3 chassis.


  Viper O-Ring Front End (0.350) $5.99
View Viper Rear Axle Setup in Pop-Up Window Viper Rear Axle Setup $9.99

  Viper 7T Motor Pinion Gear $1.99
  Viper 23T Axle Crown Gear $2.79
  Viper Axle Crown Gear Boss $2.29
View Viper 15 Spline Rear Axle in Pop-Up Window Viper 15 Spline Rear Axle $1.99

View Viper Delrin Hubs 0.265 (Pair) in Pop-Up Window Viper Delrin Hubs 0.265 (Pair) $3.49
View Viper Silicone Rear Tires (Pair) in Pop-Up Window Viper Silicone Rear Tires (Pair) $3.00

  Viper SS Spacers (.005) - 5 $1.50
  Viper SS Spacers (.010) - 5 $1.50
  Viper SS Spacers (.015) - 5 $1.50

  Viper PTFE Pro Oiler $3.99

Viper Break-In Block

Viper Break-In Block
Viper also offers a clever chassis break-in block. The pockets at the rear of the block allow the rear axle and wheels to spin freely. This makes it easy to seat motor brushes and to lap gears.

The rail extensions at the end of the block can be used to clip power leads to the rails for run-in operations.

The block can also be used to inspect and adjust pick-up shoe rail contact.


  Pro Chassis Break-In Block $17.99
View 2 Amp 0-12 VDC Power Supply in Pop-Up Window 2 Amp 0-12 VDC Power Supply $36.99


Viper Rolling Chassis

Complete Viper Racing rolling chassis are also available. These are complete chassis made up entirely of Viper racing parts. Simply add a body and you're ready to race and win!

Viper chassis include integral Lexan body mounting posts. These post can be removed if you prefer to run an injection molded body shell.

Any Tomy body shell can be used. GT body shells will require a Tomy GT body clip, while F1/IndyCar bodies must be the Super G+Plus style. Mega-G open-wheel body shells will not fit.



Viper V1 Box Stock Roller $49.99

Viper V1 Box Stock Roller The Viper Box Stock rolling chassis features a Viper V1 racing chassis fitted with Pro 4 Magnets, Viper box-stock motor armature and standard end-bell, Viper pickup shoes, hangers and springs, an O-Ring front end and Viper rear axle assembly with silicone racing tires.

This chassis will work with any standard Tomy wall pack. This rolling chassis out-performs any box-stock Tomy SG+ or Mega-G chassis.

Viper Box Stock Roller

  

Viper V1 Pro Modified Roller $79.99

Viper V1 Box Stock Roller The Viper Modified rolling chassis features a Viper V1 racing chassis fitted with Pro 10 Magnets, Viper outlaw modified motor armature and high-performance end-bell, Viper pickup shoes, hangers and springs, an O-Ring front end and Viper rear axle assembly with silicone racing tires.

This chassis works best with a Tomy 1 Amp Tri-Power pack or an Astron power supply. This rolling chassis is much faster than a box-stock racer.

Viper Pro Modified Roller

  

Viper Lexan Body Shells

Viper Lexan Body Shell Viper racing is now producing a pair of clear Lexan body shells for their rolling chassis. These body shells include windshield masks for painting and pre-marked wheel well openings and body pin holes.

These body shells make it extremely easy for anyone to get first class results when painting and trimming a clear Lexan body.


  Viper 917 Clear Body w/ Masks $3.50
  Viper 308 Clear Body w/ Masks $3.50


Viper RTR Slot Cars

Viper RTR Slot Cars Viper Ready to Run (RTR) slot cars are now available with a pre-painted and trimmed Lexan body shell.

Two varieties are available using the rolling chassis described above. These slot cars arrived pre-tuned and ready to win right out of the box.

Available in standard HOPRA colors; Red, White, Blue and Yellow along with Silver and Green.


  Viper V-Spec 917 Red $62.99
  Viper V-Spec 917 White $62.99
  Viper V-Spec 917 Blue $62.99
  Viper V-Spec 917 Yellow $62.99
  Viper V-Spec 917 Green $62.99
  Viper V-Spec 917 Silver $62.99

  Viper Pro Custom 917 Red $94.99
  Viper Pro Custom 917 White $94.99
  Viper Pro Custom 917 Blue $94.99
  Viper Pro Custom 917 Yellow $94.99
  Viper Pro Custom 917 Green $94.99
  Viper Pro Custom 917 Silver $94.99

  

Copyright © 1999-2017 by HO Slot Car Racing. All Rights Reserved.

No part of this web site may be reproduced or transmitted in
any other form or by any means for commercial use without
the prior written permission of HO Slot Car Racing.

Page last updated on 11-May-2017
Home


Print